» » » » WLL 2000 kg Hinged Vertical Plate Clamp CY

WLL 2000 kg Hinged Vertical Plate Clamp CY

310.00 € Excluding VAT

REFERENCE -EU-HVC-2000CY
Available Product available

Hinged Vertical Plate Clamp CY multi-position
CMU 2000 kg, opening 0-32 mm
For vertical lifting sheet metal adopted in all positions

Quantity : 
+
-
Add to quotation requests

Hinged Vertical Plate Clamp CY 2000 kg
See larger image

Product Descriptions
safety instructions
Notice

This plate clamp CY with hinged hook rings, WLL 2000 kg, opening 0-32 mm

can be used for the safe handling of plate at various angles. It can lift plate from the horizontal and put down in the vertical. The hinged hook ring ensures an adequate gripping pressure in every position.

The main benefit of the CY hinged plate clamps is that longer plates can be lifted or handled, using two clamps on a two legged chain sling thus eliminating the need for a spreader beam.

 

Mini lifting capacity: 400 kg

Opening: 0-32 mm
Weight: 14 kg

 

   A : 192
   B : 382
 C : 80
 D : 75
 E : 96
   F : 132

Back to top
Product Descriptions
safety instructions
Notice

The correct way to a safe use :

  • Always use 2 clamps and a beam.
  • Plate must be at full depth and lever locked into place.
  • Chipped teeth are only allowed if the clamp teeth are undamaged
  • Never lift plate unless fully engaged to the rear of the clamps
  • Only lift 1 plate at a time,
  • A spreader beam should be used for long plates
  • Never use endless chain slings
  • Check positioning of the clamp prior to use, a wrongly positioned clamp will reposition itself when it reaches the top dead centre and can release the plate
  • There should be enough slack in the chain sling to permit the lever to fully operate
  • Never force the chain lug if stuck, tap gently
  • Any force will possibly cause the camshaft to fail
  • You must not rapidly lower the load to the ground as the crane hook will force the clamp open and release the plate
  • Never lower unless the lever is in the locked position 
Back to top
Product Descriptions
safety instructions
Notice

Reviews about this WLL 2000 kg Hinged Vertical Plate Clamp CY (0 reviews)

pixel_trans
There is no review for this item, add the first one.
pixel_trans
pixel_trans
[Add your review]
Back to top
In the same category
Products viewed
< >
Back to top
In the same category
Products viewed
< >
Back to top